We invested a lot to the sheet metal cutting in the last 10 years. The result is that the laser cutting centrum is the main working station in our Company. We have five Tumpf laser cutting machines and one Trumpf punching machine.
Machine | Type of machine | max. thickness | max. working place | |||
Laser cutting machine | TC L 3030 TLF 3200 | 20 mm (steel) | 3500 × 1500 mm | |||
TC L 3030 Fiber 4000 W and LiftMaster 1530 | 20 mm (steel, stainless steel and Al) | |||||
Punching machine | TRUPUNCH TC 1000R | 6,4 mm | 2500 × 1280 mm |
We are dispone with three CNC bending machines TruBend 5130, 5085 and 7050. All they have automatic angle measuring system and automatic set-up tools due to the CNC control system.
With CNC controlled 315ton crank press we increased our capacity and quality of the pressed pieces. We are opened new possibilities for cooperation.
Technical parameters of machines
Machine | Type of machine | Press | Holder press | Fixing area of table [l x b] | Fixing area (pin) [l x b] | Tool height |
[kN] | [mm] | |||||
Eccentric mechanical press | LENR 25 | 250 | 530 × 370 | D 32/60 | ||
LENP 40 | 400 | 630 × 430 | D 40/75 | |||
LENP 63 | 630 | 750 × 500 | D 50/85 | |||
LENP 100 | 1000 | 900 × 600 | D 50/85 | |||
LE 160 VSS | 1600 | 120 | 1000 × 720 | 700 × 380 | ||
Tensile crank press | LKT 250 | 2500 | 400 | 1600 × 1200 | 1360 × 900 | 240 ÷ 360 |
LUD 500/2000 | 5000 | 1000 | 2000 × 950 | 1900 × 870 | 260 ÷ 390 | |
Sangiacomo L315T | 3150 | 2100 × 1200 | 2150 × 1200 | 650 ÷ 770 | ||
PKZZ 250/2500 | 2500 | 500 | 2500 × 1400 | 2320 × 1250 | 260 ÷ 380 | |
PKZZ 500/2800 | 5000 | 1000 | 2800 × 1500 | 2750 × 1500 | 220 ÷ 720 | |
Tensile hydraulic press | PYE – 160 | 1600 | 320 | 1200 × 760 | 900 × 670 | |
PYE – 250 | 2500 | 500 | 1250 × 800 | 900 × 670 | ||
ZE – 250 | 2500 | 1000 | 1250 × 1100 | 1310 × 1100 | 500 ÷ 900 | |
PHD 630/2500 | 6300 | 1160 | 2500 × 1730 | 2500 × 1730 | ||
Bending machines | HOL 24/1300 | 240 | 1300 × 80 | |||
FARINA PFO/PSN 65/20 | 650 | 2070 × 60 | ||||
TRUMPF TruBend 5130 | 1300 | 2690 x 120 |
CNC rounding machine | 130 – 12/3,5 | max. thickness | max. width | min. diameter / thickness | ||
3,5 mm | 1250 mm | D 110 mm / 2 mm |
Above mentioned technologies made base of our production and allow us to wide processing of the sheet metal.
These technologies are supplemented with another type of technologies for finalisation sheet metal parts.
It is mainly a welding workplace where, in addition to manual welding in the protective atmosphere, there is also the robotic welding workplace.
Our technologies for surface treatment are powder coating and enameling which has more than 110 years tradition. Enameling made Fiľakovo famous all over the world not only at home. This technology developed continuously and now we use classical wet enameling, spraying and electrostatic enameling.
Technical parameters
Equipment | Max. part dimension (w x h x d) [mm] |
Elektrostatic powder coating line | 500 x 1200 x 1200 |
Electrostatic enamelling powder coating line for sheet metal | 25 x 850 x 600 |
Curing with gas for enamelling | |
Surface pretreatment line (degreasing, mordant, Zn. phosphating) – 20 bath | 600 x 880 x 1450 |
Galvanic plating line- Ni a Zn | 100 x 330 x 450 |
Sandblasting | D 1000, hight 1500 |